CMMTQ 15.5 (EN) — Contractor – Plumbing

✅ You are enrolled in this course. Resume my course

Price before taxes

Before you buy: your questions

Which exam does this course prepare you for?

The CMMTQ 15.5 exam, Contractor – Plumbing.

What do I get when I buy?

The full course: lessons, quizzes with explained answers and online review tools. Paid codes, standards or manuals cited in some quizzes are not included.

How long do I have access?

4 months from your enrolment in the paid course, anytime, as often as you like.

Can I try before I pay?

Yes. Create a free account, no credit card required: the first lessons are open right away. Buy only if the approach works for you.

How much does it cost?

$329 + taxes, one-time payment.

Is Prof-RBQ.ca linked to the CMMTQ?

No. Prof-RBQ.ca is an independent exam-preparation centre with no ties to the CMMTQ or the RBQ. We have never seen the exam questions and do not guarantee success.

Close-up of a dripping faucet

🎁 Try before you buy

Create your free account (no credit card required) and get immediate access to the first lessons of this course. Explore the lessons, try the quiz and see if our approach works for you. Purchase the course only if you're satisfied.

Try for free

Prepare for the CMMTQ technical examination for subcategory 15.5 — the plumbing contractor licence, for those who carry out plumbing work for clients. 28 lessons, 272 exam-format questions and audio capsules, all anchored to Chapter III — Plumbing of the Quebec Construction Code, 2020 edition, in force since 11 July 2024.

Licence 15.5 at a glance

According to the RBQ, subclass 15.5 (Plumbing) authorizes construction work that is reserved exclusively for master pipe-mechanics under the Master Pipe-Mechanics Act and that involves:

  • plumbing systems in any building or structure, including the piping and all fittings used for drainage, back-venting of traps, hot or cold water supply or gas supply;
  • outdoor plumbing installations that are not building installations;
  • related construction work.

Contractor qualification in this subclass falls under the Corporation des maîtres mécaniciens en tuyauterie du Québec (CMMTQ). According to the RBQ, the CMMTQ acts as the RBQ's mandatary: it issues plumbing and heating contractor licences and prepares and administers the qualification examinations.

Please note — This course prepares you for the CMMTQ exam. Its content is educational: before applying any concept on a job site, consult the codes and regulations in force, which take precedence in case of discrepancy. Some quizzes refer to paid codes, standards or manuals that are not included and may be required; they are available separately from their publishers. If you do not have the document a question refers to, simply skip that question. Prof-RBQ is independent of the CMMTQ and the RBQ and does not guarantee exam success.

Format

Online course

Start

Now

Duration

4 months

Course Lessons

Prepare for the exam for subclass 15.5, plumbing contractor, administered by the Corporation of Master Pipe-Mechanics of Québec (CMMTQ), with a course that teaches you to find the right provision quickly in Chapter III – Plumbing and the National Plumbing Code of Canada 2020 (amended), and to choose the right backflow preventer with the Backflow Preventer Guide (CMMTQ, 2019; French title: Guide sur les dispositifs antirefoulement).

What the course includes

  • 28 lessons, from navigating Chapter III to estimating, with lesson objectives, a decision map and “Test yourself” questions
  • 8 section quick references, 6 of them with a typical calculation, a study plan and a method for the exam in two parts (the essentials and the complete guide)
  • 639 quiz questions spread over 8 section quizzes, including 102 questions with an image
  • A “Which document should you open?” quiz (45 questions) and a “Find the Article” quiz (50 questions)
  • Three calculation quizzes: water distribution (30 questions), venting (30) and drainage (30)
  • A free Demo quiz of 14 questions
  • 380 flashcards, 29 audio capsules (one per lesson and one for the complete guide to the method) and 28 audio flashcard files, one per lesson

The exam at a glance

The exam for subclass 15.5 is administered by the CMMTQ. According to its “Préparation aux examens” page, in French (consulted on 2026-11-05), it lasts 3 hours, the passing grade is 60%, and it is electronic: it is taken in person, on a laptop computer provided by the CMMTQ.

Documents provided: learn to find your way in them

  • Quebec Construction Code, Chapter III – Plumbing, and National Plumbing Code of Canada 2020 (amended)
  • Backflow Preventer Guide (CMMTQ, 2019)

Provided at the exam: a calculator, a ruler, paper and a pencil.

What the trade requires: a few examples from the course

Back-siphonage or back pressure: two mechanisms, two lists of protections

Backflow is a flow in the reverse direction, from the fixture toward the system. Back-siphonage draws water back: the pressure in the system drops below atmospheric pressure. Back pressure pushes it back: the pressure is higher on the fixture side. Against back-siphonage, the NPC accepts an air gap, vacuum breakers or check valve backflow preventers (Sentence 2.6.2.2.(2) of Division B); against back pressure of toxic substances, only an air gap or a reduced pressure principle backflow preventer is permitted (Sentence 2.6.2.3.(3)).

The air gap: the larger of two values

An air gap must not be located in a noxious environment; it must be not less than 25 mm high and at least twice the diameter of the opening of the water supply outlet (Article 2.6.2.9. of Division B of the NPC): for a 16 mm opening, 32 mm governs.

Static pressure depends on height, not on pipe size

Static pressure depends on the source and on height: each metre of descent adds about 9.81 kPa, each metre of rise removes as much. Where it may exceed 550 kPa at a fixture, a pressure-reducing valve is required (Article 2.6.3.3. of Division B of the NPC).

The suds pressure zone

A sanitary drainage pipe that serves more than one clothes washer or dishwashing sink carries detergent suds; at a change in direction of more than 45°, they create a pressure zone that can push them into nearby fixtures. Sentence 2.4.2.1.(4) of Division B of the NPC therefore reserves two lengths where no other sanitary drainage pipe is connected: 40 times the nominal pipe size before the change, but not more than 2.44 m vertical, and 10 times the nominal pipe size after it.

Frequently asked questions

Who administers the subclass 15.5 exam?

The exam for subclass 15.5, plumbing contractor, is administered by the Corporation of Master Pipe-Mechanics of Québec (CMMTQ). According to its “Préparation aux examens” page, in French (consulted on 2026-11-05), it is electronic and taken in person, on a laptop computer provided by the CMMTQ. Passing it is one of the conditions for acting as the person who answers for the execution of work (répondant) in this subclass.

How long is the exam and what is the passing grade?

According to the CMMTQ exam preparation page, the exam lasts 3 hours and the passing grade is 60%.

Which documents are provided at the exam?

Two documents are provided: the Quebec Construction Code, Chapter III – Plumbing, and National Plumbing Code of Canada 2020 (amended), and the Backflow Preventer Guide (CMMTQ, 2019; French title: Guide sur les dispositifs antirefoulement), which deals with backflow preventers. A calculator, a ruler, paper and a pencil are also provided.

What knowledge does the exam cover?

According to the CMMTQ, the exam covers, among other things, building water supply, drainage and venting systems; protection of a water distribution system; anchor and support systems; codes and standards; piping systems, valves and fittings; the notions of estimating and plan reading; the principles and methods of installing plumbing systems; the notions of hydrostatics and hydrodynamics (our translation).

How is the course organized?

The course has 28 lessons in 8 sections: codes and standards, navigating Chapter III; piping, valves, fittings, anchors, supports, installation and tests; hydrostatics, hydrodynamics and the water distribution system; protection of the water distribution system; sanitary and storm drainage; venting; non-potable water and special systems; plan reading and estimating. Each section has its quick reference and its quiz.

How many questions does the quiz bank contain?

639 questions spread over the 8 section quizzes, including 102 questions with an image; each attempt at a section quiz draws 20 questions from its section. In addition, there are 45 “Which document should you open?” questions, 50 “Find the Article” questions and three calculation quizzes of 30, 30 and 30 questions (water distribution, venting, drainage).

What are the “Which document should you open?” and “Find the Article” quizzes for?

In “Which document should you open?”, each question describes a situation and you choose the part of the document provided that governs it, from five fixed choices: Chapter III (sections 3.01 to 3.07), Division A, B or C of the NPC, or the Backflow Preventer Guide. In “Find the Article”, you look in the NPC 2020 (amended) for the Article, Table, Figure or explanatory Note (A-…) that answers: the question asks where the requirement is found, not its value.

Does the course prepare you for sizing calculations?

Yes. Lessons cover the sizing of the water distribution system, of sanitary and storm drainage and of venting, and three calculation quizzes of 30, 30 and 30 questions give practice: each explanation gives the solution step by step and names the Table of the Code where the value is found. A calculator is provided at the exam.

Does the course cover backflow preventers?

Yes. Section 4 devotes 4 lessons to them: backflow principles and cross-connections, hazard levels and types of protection, selecting the right backflow preventer (fire protection systems included), installing, orienting and testing a backflow preventer. They rely on Subsection 2.6.2. of Division B of the NPC and on the Backflow Preventer Guide, both provided at the exam.

Which edition of the code does the course follow?

The course follows Chapter III, Plumbing, of the Construction Code (chapter B-1.1, r. 2), which incorporates the National Plumbing Code of Canada 2020 with the Quebec amendments, in the most recent version consulted in November 2026. The standards the NPC refers to, such as CSA B64.10 for backflow preventers, are not provided: Table 1.3.1.2. of Division B of the NPC gives their edition.

Do you need to learn the code values?

No. Values are found in the document, not memorized. At the exam, the copy provided governs (it may be a different edition); on the job site, the edition in force in Québec applies. The course teaches where to look: which Article, which Table, which explanatory Note (A-…).

Are there flashcards and audio capsules?

Yes: 380 flashcards, 29 audio capsules (one per lesson and one for the complete guide to the method) and 28 audio flashcard files, one per lesson, to study by ear: question, pause, then answer.

What does the free part of the course contain?

The study plan, the “essentials” method, lessons 1 and 2, the Demo quiz of 14 questions taken from the bank and the audio capsule of lesson 1.

Is Prof-RBQ.ca linked to the RBQ?

No. Prof-RBQ.ca is an independent exam-preparation centre with no ties to the RBQ or the CCQ.

Prof-RBQ.ca is an independent exam-preparation centre with no ties to the RBQ or the CCQ. In case of discrepancy, the official text governs.